Devcon
When things go wrong, reach for Devcon®
Devcon® is a world leader in adhesive technology and products for industrial OEM assembly and maintenance, repair (MRO) applications.
Maintenance, Repair, and Operations (MRO). Whether you need to rebuild equipment to original specifications or prevent failures from occurring in a preventative maintenance program, Devcon® has the solution.
Metal Repair Epoxies
Versatile, durable compounds that do not require any special tools, heat or pressure for maintenance, repair and tooling applications. Available in putty and liquid forms, DEVCON METAL REPAIR EPOXIES are two-component systems that harden by mixing the curing agent with the resin. Cured epoxies can be drilled, tapped, machined or painted. Choice of a metal filling, application and performance characteristics allow the user to specify the best epoxy for the job.
PLASTIC STEEL PUTTY (A)
A steel filled epoxy for maintenance, repairs, tooling and production applications. Plastic Steel Putty requires no special tools, heat or pressure, and once set can be drilled, tapped, machined and painted. Because it hardens in about 4 hours and will not shrink, it is ideal for repairing pipes, valves and tanks, building up worn equipment, tooling and holding fixtures. Bonds to just about anything - including iron, steel, aluminium, brass, wood, glass, ceramics and concrete.
PLASTIC STEEL LIQUID (B)
A low viscosity compound with all the properties of Plastic Steel Putty, but in a liquid form for accurate detail reproduction. Used to cast low-cost patterns, moulds, holding fixtures, tools and dies.
PLASTIC STEEL 5-MINUTE PUTTY (SF)
This superfast curing putty retains all the properties of Plastic Steel and is ideal for low-temperature applications. Pot life of 5 minutes at 24°C makes it perfect for fast repairs to pipes, tanks and other essential equipment, putting them back into service in about 1 hour.
FASMETALTM 10 (HVAC)
Aluminium filled, high strength bonding, patching and sealing paste that bonds to Aluminium and other metals, ceramics, wood, concrete or glass. Fasmetal 10 is ideally suited for air conditioning repairs.
Plastic Steel, the first fortified epoxy repair compound is still one of the most effective for a wide range of general metal repair and rebuilding applications.
Plastic Steel Liquid offers a fast and economical way of making holding fixtures.
ALUMINIUM PUTTY (F)
This lightweight Aluminium filled epoxy has all the characteristics of an Aluminium finish. This non-sagging, non-rusting epoxy is ideal for repairing Aluminium parts, filling Aluminium castings and forming lightweight prototypes
STAINLESS STEEL PUTTY (ST)
Use wherever hygiene and corrosion resistance is important. Repair all types of machinery and equipment in non-rusting Stainless Steel in meatpacking plants, dairies, chemical and food plants.
TITANIUM PUTTY
The technically advanced epoxy formulation of Titanium Putty makes this product the high performer of metal filled epoxies. A service temperature of 175°C, superior compressive strength, resistance to wear and a wide range of chemicals makes Titanium Putty the ideal epoxy to rebuild shafts, keyways, bearing housings and other high-performance applications.
WET SURFACE REPAIR PUTTY (UW)
Used to repair pipes, tanks, valves and pumps in water treatment plants and paper mills whenever it is not possible to get parts and equipment completely dry. This outstanding epoxy will cure and bond in wet conditions and even underwater at temperatures as low as 4°C. It is non-shrinking and non- rusting with exceptional tensile and compressive strength making it ideal for the marine industry.
Abrasion Resistant Systems
This group of technically advanced epoxy systems was developed to meet industry requirements for repair materials to be used in extremely aggressive operating environments. DEVCON ABRASION RESISTANT EPOXIES offer a range of abrasion, corrosion and chemical resistance that allows the user to repair, protect and rebuild equipment in the most severe conditions.
WEAR RESISTANT PUTTY (WR-2)
A highly wear-resistant self-lubricating compound for use on surfaces subject to sliding or fluid wear. This non-shrinking epoxy can be used for building up and prolonging the life of shafts, pumps, valves, machine beds and for making general repairs. It is a fine ceramic filled epoxy that cures to a smooth low friction finish.
CARBIDE PUTTY
An extremely tough epoxy compound filled with silicon carbide granules up to 2mm in diameter. This product is capable of withstanding impact and abrasion from the slurry to pulverised mineral particles of 2mm. Excellent chemical and temperature resistance up to 120°C allows Carbide Putty to stand up to constant wear in pipes, elbows, coal pulverisers, slurry pumps, and exhauster fans.
CERAMIC REPAIR PUTTY
This non-sag, trowelable ceramic filled epoxy compound has been tested and proven in use to be a truly high performance product. It has outstanding wear resistance, excellent chemical and corrosion resistance and can withstand temperatures up to 175°C. Used to repair and protect processing equipment such as slurry, service water, centrifugal and ash pumps in power plants, pulp and paper mills, chemical and water treatment plants.
BRUSHABLE CERAMIC
This product has all the properties of Ceramic Repair Putty in a liquid form. Brushable Ceramic is a low viscosity, alumina filled, brushable epoxy that provides a smooth, protective barrier against wear, abrasion, corrosion, erosion and chemical attack. Use Brushable Ceramic to protect pump casings and flange faces and to rebuild and seal heat exchanger tube sheets, impeller blades, valves, water boxes, fan blades, chutes and hoppers. Brushable Ceramic is available in two colours (red, blue).
Meets AS4020 for use in contact with potable water.
SPRAYABLE CERAMIC
Sprayable Ceramic is a ceramic-reinforced composite that can be sprayed in a manner similar to high-solids paints. It is ideal for protecting pumps, pump pads, paper machines, stacks, steel frames and tanks. Sprayable Ceramic exhibits excellent chemical resistance and is available in blue and grey colour. Sprayable Ceramic uses standard airless equipment and is capable of being sprayed on in a thickness of between 400 and 600μm in one pass.
Ceramic Repair Putty protects equipment surfaces from damage due to wear and abrasion, extending service life and often eliminating the cost of replacement.
Wear Guard Fine Load offers an economical way to protect equipment surfaces from abrasion damage caused by particulate less than 3mm.
WEAR GUARDTM FINE LOAD
A high-performance wear-resistant epoxy compound containing high-alumina ceramic beads for wear and abrasion protection of equipment conveying fine particles. Can withstand operating temperatures up to 150°C and exhibits outstanding resistance to a wide range of chemicals. Wear Guard Fine Load can be trowelled to form a smooth surface and can be applied to vertical or overhead surfaces.
WEAR GUARDTM HIGH IMPACT
An extremely wear resistant, ceramic-beaded epoxy system containing urethane acrylate for superior impact abrasion. High Impact is a non-sagging putty used for protecting against impact and flex. It also provides high compressive and impact strength once cured. The product will handle temperatures up to 150 ̊C and is intended for high impact applications in pumps, scrubbers, screens, chutes, handling equipment and screw conveyors.
COMBO WEAR FC (FAST CURE)
Combo Wear FC is a high performance wearing compound that combines the abrasion resistance of high alumina ceramic beads with silicon carbide. This non-sag putty has excellent adhesion to metal, ceramic and concrete and will bond to a damp surface. Used to protect pipe elbows, housings, exhauster fans, repairs to coal fuel lines, bins and hoppers. Puts critical equipment back in service in 1-1.5 hours at 24°C.
Metal Treatment Products
DEVCON METAL TREATMENT PRODUCTS are high-performance fluids and coating compounds designed to protect, prepare, clean and lubricate metal surfaces in industrial environments.
STOP SEIZE COPPER - STOP SEIZE NICKEL
Stop Seize Copper and Nickel are heavy-duty, high-temperature water-repelling compounds that protect against locking and cold welding of metal parts. They are used to lubricate and to permit ease of assembly and dismantling without seizure or distortion of components subjected to high temperatures and heavy contact pressures. Stop Seize Copper is used for the protection of carbon steel components found in all facets of engineering and operates in environments up to 1090°C. Stop Seize Nickel is recommended for use with stainless steel and other alloys where a copper-based anti-seize compound is unsuitable. It operates in environments up to 1400 ̊C.
SURFACE CLEANER
A safe multipurpose, non-trichloroethane degreaser for use on heavy grease and oil deposits on metal, as well as an excellent general purpose degreaser. Use Cleaner Blend 300 prior to applying any Devcon epoxy or urethane compound. Parts need no rinsing and Cleaner Blend 300 leaves no residue on components. It evaporates quickly making it ideal for dip tanks.
DEVCON ZINC
Devcon Zinc is a cost-effective, high quality cold galvanizing product which provides metal protection against the formation of rust.
Suitable for applications on:
Repair of galvanized steel
General fabrication of wrought iron & garden furniture
Protection of welds on fences & gates
Truck & trailer industry applications
5 MINUTE FAST DRYING EPOXY
Rapid curing, general-purpose adhesive/encapsulant. Bonds rigid, durable substrates such as metals, glass, ceramics, concrete and wood in all combinations. Forms a clear, hard, rigid bond or coating (10MPa, 1500 psi) in minutes.
PLASTIC STEEL “STEEL FILLED” EPOXY
A high strength bond (17MPa, 2500 psi) resistant to most chemicals and waterproof. Works best on metals, steel, aluminium, copper, iron, pewter and more. Excellent for filling under speedy sleeves or where heat transfer is critical.
PLASTIC WELDERTM
A toughened structural adhesive formulated for bonding dissimilar substrates. Highly resistant to hydrocarbon fuels (gasoline, jet fuel, motor oil, hydraulic oil). Bonds PVC, fibreglass, ABS, steel, acrylics, polycarbonate, polyesters (PET; PBT), wood and ceramics. The final adhesive bond is designed to be load-bearing and resistant to weathering, humidity and a wide variation in temperature.
Devcon’s Dev-tube adhesive dispenser features a safer, easier-to-use design. Its unique snap-open safety cap eliminates the need for a knife or razor to open it while preserving unused adhesive for the next job. Other features include a convenient, snap-out mixing paddle moulded into the plunger handle.
Flexane® Rubber Repairs & Urethane Casting Compounds
DEVCON FLEXANE URETHANE COMPOUNDS are the toughest, most durable group of room temperature curing urethanes available to industry. These two-component systems are available in putty and liquid form with a choice of engineered performance characteristics for protecting equipment against abrasion, impact and noise control and for casting custom rubber parts and low-cost moulds. Flexane Liquid urethanes are widely used to make cost-effective, non-damaging holding fixtures, ultrasonic welding nests, punch dies and in combination with putties, repairs with a smooth, waterproof sealing coat.
FLEXANE® 80 PUTTY
A trowelable urethane that cures to a Shore A 87 hardness. Particularly easy to use, it requires no special tools or heat. Flexane 80 Putty is 100% solids, tear-resistant, exhibits no cold flow and it retains its shape under pressure like rubber. Used to repair process equipment exposed to impact abrasion, vibration, expansion and contraction. Bonds to metal, concrete, rubber, wood and fibreglass surfaces. Flexane primers are recommended for maximum adhesion to metal, wood and concrete surfaces.
CONVEYOR BELT REPAIRS
Flexane 80 Putty can be used for making fast permanent emergency maintenance repairs to damaged conveyor belts and rubber rollers. Used in conjunction with Flexane FL10 Metal Primer and Flexane FL20 Rubber Primer.
FLEXANE® 80 LIQUID
The liquid version of Flexane 80 Putty. Castable, non-shrinking, urethane compound for making rugged, flexible moulds, forming dies, cast parts, non-scratching holding fixtures and abrasion-noise resistant linings. Flexane 80 Liquid makes precision moulds that faithfully reproduce detail, will not change shape while curing, returns to original shape after 350% elongation and has a 10 hour demoulding time. Flexane primers are recommended for maximum adhesion to metal, wood and concrete surfaces.
FLEXANE® 94 LIQUID
A castable, non-shrinking, low viscosity urethane compound that cures to a rigid rubber material with a Shore A 97 hardness. Use Flexane 94 for applications that require faster curing, more rigid urethane than Flexane 80 and shorter demoulding times. Makes flexible moulds and non-scratching holding fixtures. Pour and mould cast rubber replacement parts that may have been discontinued.
FLEXANE® BRUSHABLE
High performance, brushable urethane coating that cures to a medium-hard rubber, Shore A 86 hardness, for protection against wear due to abrasion and impact. Having outstanding tensile strength and very good chemical resistance, this product is excellent for lining and protecting hoppers, chutes, pump impellers, feeder bowls and fans. Flexane primers are recommended for maximum adhesion to metal, wood and concrete surfaces.
R-Flex® Conveyor Belt Repair Kit
A unique urethane technology system that reduces operational downtime in a simple, quick & cost-effective way Back in Service in 90 minutes
Very High adhesion
Self-levelling liquid while applying then becomes non-sag gel in 4 minutes
A self-contained kit for repairing holes, gouges & tears in conveyor belts
Easy to mix and pour
FLEXANE PRIMERS are required for bonding of all Flexanes: Flexane 80 Putty, Flexane 80 Liquid, Flexane 94 liquid and Flexane Brushable.
FLEXANE® METAL PRIMER - FL10
Provides excellent adhesion (4.5kg/cm) to all dry metals for all grades of Flexane. Use in conjunction with FL20 Primer on metal surfaces exposed to water immersion or requiring adhesion in excess of 9kg/cm.
FLEXANE® RUBBER PRIMER - FL20
Provides excellent adhesion to rubber, wood, fibreglass, concrete and cured Flexane.